Eleoption Wireless Remote Control 7 inch LCD Baby Monitor Night Vision Video Babysitting Child Safety Camera System review

Price: N/A (as of September 22, 2017 10:03 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon site at the time of purchase will apply to the purchase of this product.

Currently unavailable

Operation Introduction:
1、Open the packaging box, take out the receiver, adjust the support post behind the receiver to a proper position, and put the receiver unit stably. Then install the antenna correctly.
2、Power the machine unit: Connect the input terminal of the receiver power adapter to AC 110~220V, other terminal to DC IN socket of the receiver. Slip the power switch to ON position, then the red power LED lights, the receiver starts up.
3、Power on the camera: connect the camera power adapter with camera, and put it on the correct position. Note: metal shield will loss the signal.
4、Channel selection: press the channel selection key, and the LED display will show the number from 1 to 4, the number means the relevant channel. As select the correct frequency channel, the screen will display the relative signal from the camera, also can adjust the frequency channel by the remote control.
5、Cycle frequency initialization: press the channel selection key for 3 seconds, the LED will display the number from 1 to 4 in rurn, and every number will keep 5 seconds, it is fit for more cameras working in the same time. Also can initialize the function by the remote control.
6、Receive more clear video: Trying to adjust antenna direction can get more clear video.
7、Adjust voice volume and video brightness on the relative side knob.
8、Video and audio output: Connect the A/V cable to show the video and audio
9、Video and audio input: press the channel selection key for a while will turn off the wireless receiving function and the LED only displays a red dot, at this condition, can connect the A/V cable with A/V source for monitor using.
10、Earphone hole belong the side of the receiver is used for external earphone.
1 x Mini wireless cameras
1 x Camera power adapters
1 x 7.0" LCD Monitor
1 x Monitor Adapter
1 x A/V line
1 x Remote
1 x Manual



NOTE: We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com and affiliated sites.
24/7 Customer Service (800) 927-7671